Category Archive: Equipment

Feb
05

The M&P Project: Dawson Charger Sights

Most factory pistols come with the cheapest, most horrible sights you could possible imagine. The M&P is better, in this regard, including a set of steel, 3-dot style sights. But, we can do better than that!

Permanent link to this article: http://re-gun.com/2012/02/the-mp-project-dawson-charger-sights/

Jan
31

Toolbox – Plano 3740

Just exactly how to carry small tools and parts in my shooting bag has challenged me for quite a while – especially since I started using a general purpose backpack, rather than a shooting specific bag. When my original solution broke, I had to dig up a new one. Here’s what I ended up with…

Permanent link to this article: http://re-gun.com/2012/01/toolbox-plano-3740/

Jan
25

The M&P Project: Apex Tactical RAM

The one thing I really had issues with when I tried out the M&P seems to be a symptom of the overall trigger design. That is, of course, the utter lack of trigger reset feedback. If you ride the trigger on accuracy work, you rely on that feedback to tell you when the trigger’s good …

Continue reading »

Permanent link to this article: http://re-gun.com/2012/01/the-mp-project-apex-tactical-ram/

Jan
23

1050 Modifications

For the most expensive and “Cadillac” press in Dillon’s lineup, you’d think it was pretty much perfect from the get go, right? Wrong. Just remember, if it ain’t broke, you can always make it better! Here’s a couple of good ones to take a look at – the improved primer catch, and the aluminum roller …

Continue reading »

Permanent link to this article: http://re-gun.com/2012/01/1050-modifications/

Jan
22

Once Fired is Best

I’ve heard a lot of opinions on what to shoot at major matches… New brass only, or well used, or whatever I have laying around, or whatever happens to be loaded up… My opinion is that once fired brass, fired in your gun from new brass, is the only way to go… Here’s why…

Permanent link to this article: http://re-gun.com/2012/01/once-fired-is-best/

Jan
18

The M&P Project – Apex Tactical springs

After installing the Apex Tactical Hard Sear and competition sear spring, I set about to evaluate the other springs at my disposal.

Permanent link to this article: http://re-gun.com/2012/01/the-mp-project-apex-tactical-springs/

Jan
09

Why the Dillon Super 1050?

I finally bit the bullet (pun intended), and bought a Dillon Super 1050. Before I go walking you through the install, and a minor improvement or two, I thought I might go through my decision process – that is… why the Super 1050? And how might that apply to you?

Permanent link to this article: http://re-gun.com/2012/01/why-the-dillon-super-1050/

Jan
08

DAA Mag Pouch followup

Well, better late than never? Since I first wrote about the DAA Race Master Magazine Pouch back in July, I’ve put a lot of mileage on three of them, including two major matches. I think I can pretty accurately describe for you my findings after using them for that period of time. And … they’re …

Continue reading »

Permanent link to this article: http://re-gun.com/2012/01/daa-mag-pouch-followup/

Jan
07

The M&P Project – Apex Tactical Hard Sear and Competition Sear Spring

Finally making it back to the M&P Project! If you recall, the first modification I made to my M&P9 was the Apex Tactical USB. The USB made a huge improvement to the stock trigger pull, but still left me with a relatively long reset. The next thing to try was Apex’s Hard Sear.

Permanent link to this article: http://re-gun.com/2012/01/the-mp-project-apex-tactical-hard-sear-and-competition-sear-spring/

Nov
15

For Sale: Brazos Custom Gunworks Pro Sx

I’m selling the gun I’ve been running for the past two years. As you can see in the picture, she’s a beaut! If you have interest, send me an email. Details on the gun follow after the jump!

Permanent link to this article: http://re-gun.com/2011/11/for-sale-brazos-custom-gunworks-pro-sx/

Older posts «